INSTALLATION INSTRUCTIONS
GMCT20 Cable
This guide describes how to connect and use the National Instruments GMCT20 cable, which has a
maximum voltage rating of 300 V, CAT II. Use this cable to connect either the NI PXI-2585 or the
NI PXI-2586 switch module to your application.
Caution
Only use this cable with the NI PXI-2585 or NI PXI-2586 module.
The GMCT20 cable is available in two configurations:
•
GMCT20-GMCT20
•
GMCT20-BARE WIRE
Contents
Conventions ......................................................................................................................................... 1
What You Need to Get Started ............................................................................................................ 2
Getting Started with the GMCT20 Cable ............................................................................................ 2
GMCT20-GMCT20 Cable........................................................................................................... 4
GMCT20-BARE WIRE Cable .................................................................................................... 5
Conventions
The following conventions are used in this guide:
»
The
»
symbol leads you through nested menu items and dialog box options to a final action.
The sequence
File»Page Setup»Options
directs you to pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a caution, which advises you of precautions to take to avoid injury, data loss,
or a system crash.
italic
Italic text denotes variables, emphasis, a cross-reference, or an introduction to a key concept.
Italic text also denotes text that is a placeholder for a word or value that you must supply.
monospace
Text in this font denotes text or characters that you should enter from the keyboard, sections
of code, programming examples, and syntax examples. This font is also used for the proper
names of disk drives, paths, directories, programs, subprograms, subroutines, device names,
functions, operations, variables, filenames, and extensions.
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ
