National Instruments GMCT20, Руководство по установке

Страница: 5 / 12

© National Instruments Corporation 5 GMCT20 Cable Installation Instructions
GMCT20-BARE WIRE Cable
The GMCT20-BARE WIRE cable is recommended for connecting the switch module to your system
if termination other than a GMCT20 connector is required. One end of the cable terminates with a
GMCT20 connector. The other end of the cable has twenty unterminated, tinned, and stripped wires.
Use the pinouts and the pin assignments listed in Table 2 to determine how to connect signals to your
application.
In the following table, letters in parentheses reference the pin designators of the connector.
J — COM5 (J)
K CH1 (K) COM1 (K)
L — COM8 (L)
M CH4 (M) CH4 (M)
N — CH1 (N)
P CH8 (P) CH8 (P)
R — COM4 (R)
S CH2 (S) COM2 (S)
T — COM9 (T)
U COM0 (U) CH3 (U)
V — CH2 (V)
W CH9 (W) CH9 (W)
X CH3 (X) COM3 (X)
Table 2. Pin Assignment for GMCT20-BARE WIRE Cable
GMCT20 Pin Wire Label NI PXI-2585 Channel NI PXI-2586 Channel
A BLACK CH6 (A) CH6 (A)
B RED — COM6 (B)
C WHITE CH0 (C) COM0 (C)
D GREEN — COM7 (D)
E ORANGE CH5 (E) CH5 (E)
F BLUE — CH0 (F)
H BROWN CH7 (H) CH7 (H)
J YELLOW — COM5 (J)
K VIOLET CH1 (K) COM1 (K)
L GRAY — COM8 (L)
Table 1.
Pin Assignment for GMCT20-GMCT20 Cable (Continued)
GMCT20 P1/P2 Pin NI PXI-2585 Channel NI PXI-2586 Channel