GMCT20 Cable Installation Instructions
2
ni.com
What You Need to Get Started
To use the cable, you need the following items:
❑
GMCT20 cable
❑
NI PXI-2585 or NI PXI-2586 switch module and documentation
❑
1/4 in. (0.6 cm) flathead screwdriver
Getting Started with the GMCT20 Cable
Complete the following steps to connect the cable to the switch module and your application. Refer to
Figures 1 through 3 for illustrations of the cable, and refer to Figure 4 for an illustration of the connector.
Caution
Always de-energize hazardous voltage sources before connecting or disconnecting
this cable.
1.
Connect the GMCT20 connector to the front connector on the switch module as shown in Figure 1.
Figure 1.
Connecting the Cable to the NI PXI-2585
2.
Tighten the screws on the cable with a 1/4 in. (0.6 cm) flathead screwdriver.
1
Screws
2
GMCT20 Connector
3
NI PXI-2585 Connector
NI PXI-2585
10x1 P
ower
Multiple
xer
3
2
1
