National Instruments FieldPoint FP-1300, Руководство пользователя

Страница: 35 / 53

© National Instruments Corporation A-1 FP-1300 User Manual
A
LED Indicators
The FP-1300 has three LEDs that communicate information. Use
Table A-1 to interpret the FP-1300 LED indicators.
Note Refer to Appendix B, Troubleshooting , for more information about the LED
indicators.
Table A-1. FP-1300 LED Indicators
LED Solid Green Flashing Green Solid Red Flashing Red
POWER Power is applied
to the FP-1300. — — —
MODULE
STATUS The FP-1300 is
operating
normally. I/O data has
stopped because
the FP-1300 is
communicating
with the
Configuration
Utility. The FP-1300 had
an unrecoverable
fault. Cycle the
power. The FP-1300 had
a recoverable
fault. Try using
the FP-1300
Configuration
Utility to resolve
the issue.
CAN STATUS The CAN bus is
transmitting
messages. — There is an error
on the CAN bus
and the CAN
communication
has stopped. There is a
message
overflow on the
FP-1300 CAN
controller. In the
Configuration
Utility, select
Reset»Cycle
Power
.