National Instruments FieldPoint FP-1000 Скачать руководство пользователя | Manualshive

Страница: 50 / 74

background image

Chapter 4

Installing and Using the FieldPoint Software

FieldPoint FP-1000/1001 User Manual

4-12

©

National Instruments Corporation

Using the FieldPoint BridgeVIEW Server

The FieldPoint BridgeVIEW server is a device server based on the
native BridgeVIEW server architecture. The I/O Items you configured
in the FieldPoint Explorer become available to the BridgeVIEW server
when you export the configuration data from FieldPoint Explorer into
the BridgeVIEW common configuration database (CCDB). From
within BridgeVIEW, the Tag Configuration Wizard imports this
configuration information, creating a tag for every I/O Item you
configured in the FieldPoint Explorer. These tags are immediately
accessible through the BridgeVIEW real-time database.

To start using the FieldPoint server with BridgeVIEW, follow these
steps:

1. Configure and test your FieldPoint server from FieldPoint

Explorer, as described in the

Using FieldPoint Explorer

section of

this chapter, and save your configuration file.

2. Select the BridgeVIEW»Export to BridgeVIEW option from the

menu bar of FieldPoint Explorer to export the current configuration
file that you just saved to BridgeVIEW’s active CCDB. (If
BridgeVIEW is not an option on your FieldPoint Explorer’s menu
bar, make sure that you have installed the FieldPoint software after
installing BridgeVIEW.)

Note: If you edit, rename, or move your configuration file after you export it to

the BridgeVIEW Active CCDB, you must re-export the new configuration
file. If you select another CCDB file as the Active CCDB for BridgeVIEW,
you must re-export your FieldPoint configuration file to the newly selected
Active CCDB file.

3. Exit FieldPoint Explorer.

Note: You must exit FieldPoint Explorer before you can use the FieldPoint server

from BridgeVIEW.

4. Launch BridgeVIEW and load the Tag Configuration Editor by

selecting Project»Tag»Configuration from the menu bar of a
BridgeVIEW window, or click on the Configure Tags button of
BridgeVIEW’s initial tile screen.

5. Click on the Configuration Wizard button in the lower-right corner

of the Tag Configuration Editor window, and then select FieldPoint
from the list of servers that appears.

«
...
48
49
50
51
52
...
»

Содержание FieldPoint FP-1000











































































Отзывы:

Нет отзывов

Похожие инструкции для FieldPoint FP-1000

Бренд: S-COM Страницы: 400

Бренд: Ebyte Страницы: 38

Бренд: EBS Страницы: 30

Бренд: Nabco Страницы: 35

Compact Comfort VAV12

Бренд: SAI HVAC Страницы: 16

Бренд: saia-burgess Страницы: 203

Бренд: Sailor Страницы: 1

Бренд: Taco Electronic Solutions Страницы: 28

Spartan-3A DSP FPGA Series

Бренд: Xilinx Страницы: 140

Бренд: Parker Страницы: 42

Бренд: EVERSPRING Страницы: 3

Бренд: elsner elektronik Страницы: 2

769N FireLock NXT Series

Бренд: Victaulic Страницы: 40

Бренд: FrSky Страницы: 2

VBA-2E-G11-I/U/PT100-F

Бренд: Pepperl+Fuchs Страницы: 24

NovoCon S Digital

Бренд: Danfoss Страницы: 2

Бренд: NXP Semiconductors Страницы: 39

Бренд: Hunter Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды