manualshive.com logo in svg
background image

© 2002–2007 National Instruments Corp. All rights reserved.

373322C-01

Dec07

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the 

Terms of Use

 section on 

ni.com/legal

 for more information about National Instruments trademarks. Other 

product and company names mentioned herein are trademarks or trade names of their respective companies. 
For patents covering National Instruments products, refer to the appropriate location: 

Help»Patents

 in your software, 

the 

patents.txt

 file on your CD, or 

ni.com/patents

.

Where to Go for Support

For more information about setting up the Compact FieldPoint 
system, refer to these National Instruments documents:

Compact FieldPoint controller user manual 

Compact FieldPoint I/O module operating instructions

Go to 

ni.com/support

 for the most current manuals, examples, 

and troubleshooting information.

For telephone support in the United States, create your service 
request at 

ni.com/ask

 and follow the calling instructions or dial 

512 795 8248. For telephone support outside the United States, 
contact your local branch office: 

Australia 1800 300 800, Austria 43 662 457990-0, 
Belgium 32 (0) 2 757 0020, Brazil 55 11 3262 3599, 
Canada 800 433 3488, China 86 21 5050 9800, 
Czech Republic 420 224 235 774, Denmark 45 45 76 26 00, 
Finland 358 (0) 9 725 72511, France 01 57 66 24 24, 
Germany 49 89 7413130, India 91 80 41190000, 
Israel 972 3 6393737, Italy 39 02 41309277, Japan 0120-527196, 
Korea 82 02 3451 3400, Lebanon 961 (0) 1 33 28 28, 
Malaysia 1800 887710, Mexico 01 800 010 0793, 
Netherlands 31 (0) 348 433 466, New Zealand 0800 553 322, 
Norway 47 (0) 66 90 76 60, Poland 48 22 3390150, 
Portugal 351 210 311 210, Russia 7 495 783 6851, 
Singapore 1800 226 5886, Slovenia 386 3 425 42 00, 
South Africa 27 0 11 805 8197, Spain 34 91 640 0085, 
Sweden 46 (0) 8 587 895 00, Switzerland 41 56 2005151, 
Taiwan 886 02 2377 2222, Thailand 662 278 6777, 
Turkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545

Содержание FIELDPOINT CFP-CB-1





















Отзывы: