Chapter 2
Hardware Installation and Configuration
©
National Instruments Corporation
2-3
Mounting the FBUS-HSE/H1 LD to a Panel
Complete the following steps to install the optional Fieldbus network panel
mount accessory and mount the FBUS-HSE/H1 LD network module to a
panel. You can order the panel mount accessory from National
Instruments.
1.
Use a flathead screwdriver to open the rail clip to the unlocked
position, as shown in Figure 2-1.
2.
Snap the panel mount accessory onto the module, as shown in
Figure 2-3.
Figure 2-3.
Installing the Network Panel Mount Accessory
3.
Lock the panel mount accessory into place by pushing the rail clip to
the locked position.
4.
Mount the FBUS-HSE/H1 LD to your panel with the panel mount
accessory.
