Table 2. FD-11613 Cables and Accessories (Continued)
Cable/Accessory
Part Number
SHM128M-RJ45 Ethernet Cable (1 m, 2 m, 3 m, 10 m lengths)
785944-01/02/03/10
SHM128M-SH128M Ethernet Cable (0.3 m, 1 m, 3 m lengths)
785946-0R3/01/03
M12 Torque Wrench, I/O and Ethernet
786181-01
M12 Torque Wrench, Power
786181-02
Universal M12 Male Cap, Plastic
786177-01
Universal M12 Male Cap, Metal
786178-01
Universal M12 Female Cap, Plastic
786180-01
Universal M12 Female Cap, Metal
786179-01
FD-11613 Documentation
Documents that contain information about your FieldDAQ device:
•
FD-11613 Specifications
•
FD-11613 Quick Start
•
FD-11613 Safety, Environmental, and Regulatory Information
Safety Guidelines
Caution
Do not operate the FD-11613 in a manner not specified in this user guide.
Product misuse can result in a hazard. You can compromise the safety protection
built into the product if the product is damaged in any way. If the product is
damaged, return it to National Instruments for repair.
The FD-11613 is rated for use in DRY or WET LOCATIONS. Hazardous voltages may not be
connected to the device. A hazardous voltage is a voltage greater than 42.4 V peak voltage or
60 V DC in DRY LOCATIONS, and 22.6 V peak or 35 V DC in WET LOCATIONS.
Caution
All wiring must be insulated for the highest voltage used.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
4
|
ni.com
|
FD-11613 User Guide