![background image](http://html2.mh-extra.com/html/national-instruments/fd-11613/fd-11613_user-manual_3453917005.webp)
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Notice
To ensure the specified EMC performance, product installation requires
either special considerations or user-installed add-on devices.
Notice
To ensure the specified EMC performance, operate this product only with
shielded Ethernet cables.
Special Conditions for Marine Applications
Some products are approved for marine (shipboard) applications. To verify marine approval
certification for a product, visit
ni.com/certification
and search for the certificate.
Notice
In order to meet the EMC requirements for marine applications, install the
product in a shielded enclosure with shielded and/or filtered power and input/output
ports. In addition, take precautions when designing, selecting, and installing
measurement probes and cables to ensure that the desired EMC performance is
attained.
Unpacking
The FD-11613 ships in an antistatic package to prevent electrostatic discharge (ESD). ESD can
damage several components on the device.
Notice
Never touch the exposed pins of connectors.
To avoid ESD damage in handling the device, take the following precautions:
•
Ground yourself with a grounding strap or by touching a grounded object.
•
Touch the antistatic package to a metal part of your computer chassis before removing the
device from the package.
Remove the device from the package and inspect it for loose components or any other signs of
damage. Notify NI if the device appears damaged in any way. Do not install a damaged
device.
Store the device in the antistatic package when the device is not in use.
Hardware Symbol Definitions
The following symbols are marked on your FieldDAQ device.
FD-11613 User Guide
|
© National Instruments
|
5