Chapter 4
Arb Operation
©
National Instruments Corporation
4-15
DAQArb 5411 User Manual
Figure 4-13.
Stepped Trigger Mode for Arb Mode
After any stage has been generated completely, the first eight
samples of the next stage are repeated continuously until the next
trigger is received.
Note:
For stepped trigger mode, you can predefine the state in which a stage ends
by making the first eight samples of the next stage represent the state you
want to settle.
•
DDS mode—Stepped trigger mode and burst trigger mode are the
same thing for the DDS mode of waveform generation.
Burst Trigger Mode
After a start trigger is received, the waveform described by the first
stage is generated until another trigger is received. At the next trigger,
the buffer of the previous stage is completed before the waveform
described by the second stage is generated. Once the staging list is
exhausted, the waveform generation returns to the first stage and
continues in a cyclic fashion.
You can use burst trigger mode with the both the Arb and DDS
waveform generation modes, as follows:
•
Arb mode—Figure 4-14 uses the stages shown in Figure 4-4 to
illustrate a burst trigger mode of operation for Arb mode.
*
*The first eight samples of the next stage are generated repeatedly.
Start Trigger
Start Trigger
Start Trigger
End
of Stage 3
End
of Stage 1
Start Trigger
End
of Stage 2
End
of Stage 1
Repeat Sequence
Keep Going
Until Stopped
