Connecting the cRIO-9032 to a Wireless Network
Complete the following steps to connect the cRIO-9032 to a wireless network.
1.
Launch MAX on the host computer.
2.
Expand Remote Systems in the configuration tree and locate your system.
3.
Select your target.
Tip
MAX lists the system under the model number followed by the serial
number, such as NI-cRIO-9032-1856AAA.
4.
Click the
Network Settings
tab.
5.
Select your country.
6.
Select
Connect to a wireless network
as the Wireless Mode.
You may need to upload a certificate by clicking
Certificate Management
. Contact your
IT department for information about your network settings and configuration details.
7.
Click
Wireless Network
to add a network from the scanned list or click
Other Network
and enter settings for your network.
8.
Click
Save
.
The Wireless Adapter wlan0 section displays the search status.
9.
Click the
System Settings
tab and verify that the chassis has a wireless IP address (along
with the Ethernet IP address); if the System State reads Connected - Running, the
cRIO-9032 is connected to the wireless network.
Creating a Wireless Network with the cRIO-9032
Complete the following steps to connect the cRIO-9032 to a wireless network.
1.
Launch MAX on the host computer.
2.
Expand Remote Systems in the configuration tree and locate your system.
3.
Select your target.
Tip
MAX lists the system under the model number followed by the serial
number, such as NI-cRIO-9032-1856AAA.
4.
Click the
Network Settings
tab.
5.
Select your country.
6.
Select
Create wireless network
as the Wireless Mode.
7.
Enter the SSID, Channel, and Security type for the wireless network you are creating.
8.
Select
DHCP Only
in the
Configure IPv4 Address
drop-down menu.
9.
Click
Save
.
10. Verify that the Status reads
Broadcasting
.
NI cRIO-9032 User Manual
|
© National Instruments
|
3
