National Instruments CFP-AO-200, Руководство по эксплуатации

Страница: 1 / 13

323343A-01 October 2002
© 2002 National Instruments Corp. All rights reserved.
FieldPoint™, National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products, refer to the appropriate location:
Help»Patents in your software,
the
patents.txt
file on your CD, or
ni.com/patents
.
FieldPoint Operating Instructions
FP-AO-200
AND C
FP-AO-200
Eight-Channel 20 mA Loop Output Modules
These operating instructions describe how to install and use the
National Instruments FP-AO-200 and cFP-AO-200 analog output
modules (referred to inclusively as the [c]FP-AO-200). For
information about configuring and accessing the [c]FP-AO-200
over a network, refer to the user manual for the FieldPoint network
module you are using.
Features
The [c]FP-AO-200 is a FieldPoint analog output module with the
following features:
• Eight 0–20 or 4–20 mA outputs
• 0.5 mA overranging
• 12-bit resolution
• Up to 1 k
Ω
load impedance (with 24 V loop supply)
• Indicators for open current loops
• Short-circuit protection
• 2,300 V
rms
transient overvoltage protection between the
inter-module communication bus and the I/O channels
• –40 to 70 °C operation
• Hot plug-and-play