The Software is the Instrument ™ is a trademark of National Instruments Corporation. Product and company names are trademarks or trade names
of their respective companies.
321845A-01
©
Copyright 1998 National Instruments Corp. All rights reserved.
January 1998
INSTALLATION GUIDE
I
NSTALLING
Y
OUR
BNC-2810
SDA C
ONNECTOR
B
LOCK
This installation guide describes how to connect a BNC-2810 to your
PCI/PXI-6810 serial data analyzer (SDA) and shows the BNC-2810
channel and signal connections.
Introduction
The BNC-2810 is a connector block designed for use with a PCI/PXI-6810
serial data analyzer. You can use the BNC-2810 on a desktop or optionally
mount it on a Deutsche Industrie Norme (DIN) rail that conforms to the
Comité Européen de Normalisation Electrotechnique (CENELEC) 35 mm
standard. The BNC-2810 provides easy access to the following channels
and signals:
•
RS-232 channels 0 and 1
•
RS-485 channels 0 and 1
•
Programmable channels 0, 1, and clock
•
Input and output triggers
•
Digital input/output (I/O) lines 0 through 7
•
Output enable signals 0 and 1
•
External power supply
Refer to Getting Started with Your PCI/PXI-6810 Serial Data Analyzer for
more detailed information regarding these channels and signals.