Installing Your BNC-2810 SDA Connector Block
2
©
National Instruments Corporation
What You Need to Get Started
You need the following to set up and use your BNC-2810:
❑
Installing Your BNC-2810 SDA Connector Block installation guide
❑
Your computer or PXI chassis
❑
One of the following devices:
–
PCI-6810 serial data analyzer
–
PXI-6810 serial data analyzer
❑
BNC-2810 SDA connector block
❑
SH6868-D1 shielded cable
❑
DIN rail mounting hardware (optional)
Typical Connection
Figure 1 shows a typical connection of the BNC-2810 connector block to a
PCI/PXI-6810 serial data analyzer. Use the following steps to install your
BNC-2810:
1.
Insert one end of the SH6868-D1 shielded cable into the 68-pin
connector on your BNC-2810 connector block.
2.
Insert the other end of the SH6868-D1 shielded cable into the 68-pin
connector on your PCI/PXI-6810 serial data analyzer.