National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the
Terms of Use
section on
ni.com/legal
for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products/technology,
refer to the appropriate location:
Help»Patents
in your software, the
patents.txt
file on your
media, or the
National Instruments Patent Notice
at
ni.com/patents
.
© 2009 National Instruments Corporation. All rights reserved.
372900A-01
May09
Installing the Hard Drive
Complete the following instructions to install a hard drive in the
NI 8260 4-Drive Storage Module.
1.
Turn the module on its side and insert the hard drive straight into the
open slot by aligning the screw holes on the hard drive as shown in
Figure 3.
Figure 3.
Inserting a Hard Drive
2.
When the hard drive is fully inserted into the SATA connector, install
all four screws to secure the hard drive in place, as indicated in
Figure 4.
Figure 4.
Securing the Hard Drive in the Module
3.
Check to see if the screws on all installed hard drives are tightened.
If you experience issues during the removal or installation of a hard drive,
please contact National Instruments.
For more information on these tools, refer to
ni.com/support
.
Содержание 8260
Страница 1: ...NI 8260...
