USER GUIDE
SATA Hard Drive Removal and
Replacement Procedure for
NI 8260 4-Drive Storage Module
This document provides instructions for removing and replacing a SATA
hard drive with your NI 8260 4-Drive Storage Module.
Cautions
Before you handle the NI 8260 or the hard drive, discharge any built-up static
charge that may have accumulated. Electrostatic discharge may damage the NI 8260 and/or
the hard drive.
Avoid mounting the hard drive near strong magnetic sources such as loud speakers. Ensure
that the hard drive is not affected by external magnetic fields.
Protect the hard drive and NI 8260 from hard contact with other objects. Impacts may
damage the equipment.
Do not press the cover of the hard drive. Pressing it too hard may cause cover and spindle
motor contact, which would damage the hard drive.
When handling the hard drive, do not touch the printed circuit board. Hold the hard drive
by its edges.
Removing a Hard Drive
Notes
You will need to remove Drive 1 before you can remove Drive 0 (Drive 0 is the
bottom drive).
If it is difficult to remove the hard drive, loosen
all
of the screws holding the installed
hard drives.
Содержание 8260
Страница 1: ...NI 8260...
