National Instruments 6587 Скачать руководство пользователя

Страница: 20 / 30

Installing the Application Software and Driver

Before installing your hardware, you must install the application software and instrument
driver. Visit

ni.com/info

and enter

rdsoftwareversion

as the Info Code to determine

which minimum software versions you need for your device. Install the software in the
following order:
1.

Install LabVIEW.

Refer to the

LabVIEW Installation Guide

for installation instructions for LabVIEW and

system requirements for the LabVIEW software. Refer to the

LabVIEW Upgrade Notes

for additional information about upgrading to the most recent version of LabVIEW for
Windows. Documentation for LabVIEW is available at

ni.com/manuals

and by selecting

Start

All Programs

National Instruments

LabVIEW

LabVIEW Manuals

Install the LabVIEW FPGA Module.

Refer to the

LabVIEW FPGA Module Release and Upgrade Notes

for installation

instructions and information about getting started with the LabVIEW FPGA Module.
Documentation for the LabVIEW FPGA Module is available at

ni.com/manuals

and by

selecting

Start

All Programs

National Instruments

LabVIEW

Manuals

(Optional) Install the LabVIEW Real-Time Module.

Refer to the

LabVIEW Real-Time Module Release and Upgrade Notes

for system

requirements, installation instructions, and additional information about using the
LabVIEW Real-Time Module.

Install NI FlexRIO.

Refer to the

NI FlexRIO Readme

on the NI FlexRIO installation media for system

requirements and installation instructions for NI FlexRIO Support. Documentation for
NI FlexRIO Support is available at

ni.com/manuals

and by selecting

Start

All

Programs

National Instruments

NI FlexRIO

Note

If you are not using an adapter module, skip step 5.

Install NI FlexRIO Adapter Module Support.

Refer to the

NI FlexRIO Adapter Module Support Readme

on the NI FlexRIO Adapter

Module Support installation media for system requirements and installation instructions.
Documentation for NI FlexRIO Adapter Module Support is available at

ni.com/manuals

and by selecting

Start

All Programs

National Instruments

NI FlexRIO

Adapter Module Documentation

Installing the NI FlexRIO Devices

Note

You must install the software before installing the hardware.

ni.com

NI 6587 Getting Started Guide

Содержание 6587































Результаты поиска

Содержание 6587

Отзывы:

Похожие инструкции для 6587

Бренды по названию

Популярные бренды

National Instruments 6587, Руководство по началу работы

Результаты поиска

Содержание 6587

Отзывы:

Похожие инструкции для 6587

Бренды по названию

Популярные бренды