National Instruments 653 Series, Руководство пользователя

Страница: 5 / 16

© National Instruments 5 NI 653X Cable Adapter User Guide
Removing the NI 653x Cable Adapter from its Enclosure
You will need to remove the NI 653x cable adapter from its enclosure to
connect signals. To remove the cable adapter from its enclosure, complete
the following steps:
1. Remove the screws from the cable adapter enclosure top cover,
as shown in Figure 3.
Figure 3. Remove Screws from the Enclosure
2. Remove the enclosure top cover.
Note Be sure to remove the screws from side with the NI logo label, as shown in Figure 3.
1 M2.5
×
6 mm Phillips Flathead Countersunk Screws
1
NA
TIONAL
INSTRUMENTS
653X CABLE ADAPTER
Remo
ve scre
ws on this side of
enc
losure to access terminals.