National Geographic Colour Weather Center 5in1, Инструкция по эксплуатации

Страница: 39 / 52

39 / 52
Press the SENSOR button for approx. 2 seconds to initiate the reception of the measured values
again.
22 Rainfall
The amount of precipitation is displayed on the base station in millimeters or inches that has accumu-
lated over a period of time, based on the current precipitation rate.
Rainfall rate Daily rainfall Weekly rainfall Monthly rainfall
Select display mode
Press the RAIN key repeatedly until the desired time period is shown on the display:
RATE Current precipitation of the last hour
DAILY Total precipitation of the current day, measured from midnight
WEEKLY Total precipitation of the current week
MONTHLY Total precipitation of the current month
Select measurement unit (millimeters or inches)
1. Press the RAIN key for about 3 seconds to enter unit setting.
2. Press the UP or DOWN key to toggle between mm (millimeters) and in (inches).
3. Finally, press the RAIN key to save the settings and exit settings mode.
NOTICE! The readings are automatically updated every 6 minutes.
23 HI/LO Alert
HI/LO alert are used to alert you of certain weather conditions. Once activated, an alarm sound is
triggered and the alert icon flashes as soon as a set value is reached. Supported areas and alarm
types:
Area Type of alert available
Indoor temperature HI AL / LO AL
Indoor humidity HI AL / LO AL
Outdoor temperature HI AL / LO AL
Outdoor humidity HI AL / LO AL
Rainfall (daily) HI AL*
Wind speed HI AL
HI AL = High alert / LO AL = Low alert
*Daily rainfall since midnight
HI/LO alert setting
1. Press ALERT button until the desired area is selected.
2. Press UP or DOWN button to change the value.
3. Press ALERT button to confirm and continue to the next setting.
Enable/Disable HI/LO Alert
4. Press ALERT button until the desired area is selected.