Safety Section
- 7 -
2.1
Safety details
The person in charge of safety shall be responsible for informing workers about the risks associated with dust
collector operation.
The obligation also exists of training workers so they are able to protect themselves and others.
Failure to observe basic safety regulations and warnings could cause accidents during dust collector
operation, maintenance and repair. Accidents can often be avoided by recognizing potentially dangerous
situations before these occur. Operators should be aware of potential hazards and be trained and skilled
enough. They should also have the tools necessary to perform these duties properly.
NFE
shall under no circumstances be deemed liable for accidents or damage caused by use of the dust
collector by personnel not properly trained or who use it in an improper manner, as well as by even partial
failure to comply with the safety regulations and intervention procedures indicated in this manual.
The safety warnings and warning notices are indicated in this manual and on the product.
Unless these hazard messages are heeded, the operator could become involved in accidents with serious
consequences for him/herself and for other people.
The safety messages are highlighted by the following symbols:
Attention!
Unless these messages are heeded, operator injuries could occur.
Warning!
Unless these messages are heeded, dust collector damage could occur.
NFE
cannot foresee all possible circumstances capable of representing a potential hazard. The warnings in
this manual and on the products should not therefore be deemed exhaustive. In the event of tools,
procedures, work or machining methods being used that are not explicitly recommended by
NFE
, make sure
no hazards exist for operators and others.
Only use original NFE spare parts.
NFE
declines all liability in the event of non-original spare parts being used.
