National Flooring Equipment 550 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 28

National Flooring Equipment 550 Скачать руководство пользователя страница 8

Safety

Fax: 763-535-8255

[email protected]

8

Safety

GUIDELINES FOR USING EXTENSION CORDS (CONTINUED)

•

Keep away from water. Do not use if wet.

•

Inspect thoroughly before each use. DO NOT USE IF DAMAGED.

•

Make sure equipment is not running before disconnecting cord.

•

FULLY INSERT plug into outlet.

•

Do not remove, bend or modify any metal prongs or pins of cord.

•

Do not use excessive force to make connections.

•

Do not connect a three prong plug to a two-hole cord.

•

Avoid overheating. Uncoil cord and do not cover it with any material.

•

Do not walk on cord.

•

Do not drive, drag or place objects over cord.

•

Use a 12 gauge, 115v cord, 50ft maximum length with this machine. (Included with purchase.)

•

Regularly examine the supply cord for damage, such as cracking or aging. If damage is found, replace the cord before further use.

•

Only replace the supply cord with the type specifi ed in the instruction manual.

Fax: 763-535-8255

[email protected]

8

«
...
6
7
8
9
10
...
»

Содержание 550





























Отзывы:

Нет отзывов