National Flooring Equipment 550, Инструкция по эксплуатации, Страница: 16 / 28

Machine Maintenance
MAINTAINING EQUIPMENT
Keep equipment in good repair by adopting a regular maintenance program. Before use, examine the general condition of equipment. Inspect
guards, switches, equipment cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper
mounting, broken parts and any other conditions that may affect safe operation. If abnormal noise or vibration occurs, turn the equipment off
immediatly and have the problem corrected before further use. Do not use damaged equipment. Tag damaged equipment “DO NOT USE” until
repaired. See repairs.
MAINTENANCE GUIDELINES
• Perform mechanical inspection.
• Cleaning: pulleys, spindles, bearings, housing, etc.
• Electrical inspection (switch, cord, plugs, etc.)
• Testing to assure proper mechanical and electrical operation.
• Check nuts on shock absorbers and bottom plates.
• Check all screws and fi ttings for a tight and secure fi t.
• Keep a sharp blade in machine for optimum performance.
• Remove blade when machine is not in use.
CLEANING
Clean dust and debris from vents. Keep the equipment handle clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean
since certain cleaning agents and solvents are harmful to plastic and insulated parts. Do not clean with: gasoline, turpentine, lacquer thinner,
paint thinner, chlorinated cleaning solvents, ammonia or household detergents containing ammonia. Never use fl ammable or combustable
solvents around equipment.
Machine is pressure washable. Motor, motor junction box, capacitor box and switch are protected from splashes of water but
CAN NOT be subjected to jets of high pressure. Thoroughly dry machine before use. Do not use machine when wet or damp.
REPAIRS
If your equipment is damaged, contact National for a return authorization number and return the complete set of equipment.
• Shipments are not accepted without a return authorization number. (Reference Guarantee)
• COD or freight collect shipments will not be accepted.
Fax: 763-535-8255 info@nationalequipment.com 16
WARNING:
ALWAYS UNPLUG MACHINE BEFORE MAINTAINING. NEVER DISASSEMBLE THE TOOL OR TRY TO DO ANY REWIRING
ON THE TOOL’S ELECTRICAL SYSTEM. FAILURE TO DO SO COULD CAUSE DAMAGE TO MACHINE OR SERIOUS INJURY. CONTACT
NATIONAL FOR ALL REPAIRS.