National Flooring Equipent GP18, Руководство по обслуживанию

Страница: 11 / 21

9
Failures due to inadequate or incorrect maintenance may generate very high repair costs and
long idle periods for the machine. Regular maintenance is essential. Safety and service life of the
machine depend, among other things, on proper maintenance.
The following table will show recommendations about time, inspection and maintenance for the
normal use of the machine. The time indications are based on uninterrupted operation. When the
indicated number of working hours is not achieved during the corresponding period, the period can
be extended. Due to different working conditions it cannot be foreseen how frequently inspections
for wear checks, inspection, maintenance and repair works ought to be carried out. Prepare a
suitable inspection schedule considering your own working conditions.
4.2 Maintenance and Inspection
Operating Hours / Time Period Inspection Points / Maintenance Instructions
Daily — Prior to Operation • Check all electrical cables for cuts or damage.
• Check the hose connections for tightness and fixed seat.
• Check the hose to the dust collector for damage.
• Make sure that the dustbin of the dust collector has been
dumped.
• Check Morflex Coupler, tool plate, and diamond tooling
for wear and damage.
• Check that shroud and rubber seal are in good working
condition.
• Check the electric connections for sediments of dirt or
foreign bodies.
• Check the electric motor for dirt and other contaminants.
• Check gearbox assembly for any leaks of oil from motor
and top and bottom of gear box.
Daily — After Operation • Check for debris, if any, in the dust ports under gear box
as well as at handle.
4.3 Maintenance
Stock all spare or wear parts that cannot be supplied quickly. As a rule, production standstill periods
are more expensive than the cost for the corresponding spare part.
Screws that have been removed must be replaced with those of the same quality (strength,
material) and design.
Prior to any repair work on the machine and its drives, secure the machine against
unintentional start-up. Pull out the main plug in order to do this. Store the plug near the
machine to avoid accidents.