National Cycle, Inc.
PO Box 158, Maywood, IL 60153-0158
P. 708-343-0400 F. 708-343-0625 / E. [email protected]
www.nationalcycle.com
©2016 National Cycle, Inc.
Page 8 of 13
10-118015-000 11/16
WIRE HARNESS INSTALLATION- BATTERY
TERMINUS A
Do Not fully secure Wire Harness with
Zip Ties until after the windshield is
installed.
4. Follow the frame to under the seat of vehicle.
Route Terminus Section (a) into Battery
compartment.
Figure 14, 15 and 16
5. Loosen the negative terminal nut of the vehi-
cle’s battery with a Philips screwdriver or an
adjustable wrench. Slip the Brass Open Ring
Connector (Black Wire) under the negative
terminal nut and tighten securely. Repeat for the
positive terminal (Red Wire).
(Phillips Screw-
driver) Figure 17
Figure 15
Figure 16
Figure 17
Figure 14
Route Terminus Section (a) rearward
to battery compartment
a.
