Item
Part No.
Description
Qty.
Tools / Notes
1
20-290393-000
3D Windscreen with Trim and Grommets
1
2
44-447165-000
Grommets, Side of Windshield
4
Installed on Windscreen
3
44-447172-000
Grommets, Top of Windshield
4
Installed on Windscreen
3a
34-346066-000
Spacer, Compression Limiter
4
Installed in Grommet (3)
4
44-448500-000
Trim, Lower
1
Installed on Windshield
5
75-766825-000
Gasket, Foam
1
6
80-875150-000
Motor, Assembly
1
Installed on Windscreen
7
80-875153-000
Arm, Wiper Assembly, (350mm)
1
Replacement Arm Part No. is N30911
8
80-875154-000
Blade, Wiper Assembly, 14” (355.6mm) 1
Replacement Blade Part No. is N30900
9
44-442523-000
Reservoir & Pump Assembly
1
Bag#1244
10
44-449370-000
Clamp, Wraparound
7
11
44-449380-000
Retaining Pin
7
12
49-490355-000
Washer, Flat, Black
5
13
55-563131-000
Screw, Phillips, #12 x 1.25”, SS
7
#2 or #3 Phillips Screw Driver
14
75-764009-000
Clamp Spacer
7
15
44-448705-000
Clamp, Cable Retainer, Black
2
16
44-447165-000
Grommet
1
Used when installing item 16
Parts Installed on Windscreen
Tools Required
National Cycle, Inc.
PO Box 158, Maywood, IL 60153-0158
P. 708-343-0400 F. 708-343-0625 / E. [email protected]
www.nationalcycle.com
©2016 National Cycle, Inc.
Page 2 of 13
10-118015-000 11/16
PREPARATION
This Kit has been carefully packed and inspected at the factory. Report any missing part directly to National Cycle, Inc.
along with the Bag No. and Date on outside of Windshield Carton.
Carefully unpack the windshield, sort the parts, and make sure you have everything required to complete the installation
to the vehicle.
Parts List Continues on Next Page
TOOL LIST
Flat Blade Screwdriver
Marker
X-Acto® Knife, or similar
Punch
Wire Cutters
Power Drill with 3/4” (19mm) hole saw, or similar
Small Drill Bit (1/8”) (3mm) for pilot hole
#2 or #3 Phillips Screw Driver or Phillips Bit for Drill
RESERVOIR
3D WINDSHIELD
9 x1
15 x2
12 x5
16 x1
10 x7
BAG#1244
13 x7
14 x7
11 x7
1 x1
2 x4
3 x4
3a x4
4 x1
5 x1
6 x1
7 x1
8 x1
