INSTALLATION AND OWNER’S MANUAL
National Cycle Windshield Mount Kit
JE, JF, JG, and JH
Installation of Spacers and Clamps
Note: 2a. instruction is for installation of National Cycle Chrome Lowers (optional.)
1.
Install die cut Rubber Clamp Spacers to each clamp
half.
Diagram A. NOTE:
Kawasaki Classic VN1500D
and VN800B additional strip is required at
LOWER EDGE
of clamp.
Diagram B. NOTE:
VN900 place additional
strip at
UPPER EDGE
of clamp.
Diagram B.
2.
Put Clamps on fork.
A. Must hit upper triple clamp.
B. Use M6 x 12 Screw and Acorn nut to
clamp together. Tighten to 10 ft. lbs.
Diagram C.
2a. Instruction for Chrome Lower installation.
A. Use the M6 x 12 Screws and Acorn Nuts thru
the two inner holes. Tighten to 10ft. lbs.
Diagram A.
Diagram B.
Diagram C.
Installation of Windshield
Diagram D.
3.
Install windshield onto brackets using chrome
spacers and flat plate, as shown in diagram D.
10-113999 English Page 1 of
6
01/00 Rev. A 04/06
Rev B 1106 /
Note: Kawasaki VN900A
place additional strip on top
of die cut piece at upper
edge of one side of each
pair of clamps.
Kawasaki
VN 1500D and VN800B
Classics; Place extra strip
on top of die cut piece at
lower edge of clamp. (One
side of each pair of clamps
only.)
1
9
10
3
4
4
3
5
8
7
6
