7. Cleaning of UVC-Systems
7.1 Purpose
Systematic cleaning is part of the maintenance of the equipment and contributes to the optimal function of
the equipment. At the same time, cleaning will ensure ongoing inspection of the condition of the equipment.
The following sections provide procedures that describe how routine cleaning is performed for equipment
provided by NATDIS.
7.2. Precautions
WARNING!
Danger of non-coherent radiation
In this case UVC light.
Attention:
Protect eyes and skin against UVC-light.
Equipment supplied by NATDIS may only be cleaned when the system is switched off
and in a safe condition.
All work on UVC systems requires that the system is secured before work begins.
Cleaning must only be done when the system has stopped and cooled down!
Use clean gloves are required
Attention:
Protect your hands from heat, sharp edges, and glass splinters with gloves. Must
comply with EN388: 2019-4121X
Always comply with local regulations when choosing a cleaning agent. Follow the warnings and safety
descriptions on the individual containers and safety data sheets. Abrasives must not be used.
