background image

National Communications 

  Page  13

ENCRYPTION FACILITY

T h i s   f a c i l i t y   i s   u s e d   t o
ENCRYPT all MP3 based
Music and Message files for
use with our BMS devices.

It is accessed via the Common
Functions section of the BMS
Dealer Control Program.

The Encryption process is a
d e m a n d i n g   m a t h e m a t i c a l
manipulation of your original
MP3 files and can be quite time
consuming. Depending on the
power of your PC, this can take
5-10 seconds of processing
time, per minute of MP3 Music
or Message.

You should first navigate through to
the SOURCE FOLDER of the Music
Folder,  Message File or High Rotation
File that you require to be encrypted
and then select if it is a full folder or a
single file to be encrypted

You should then navigate through to
the DESTINATION FOLDER for the
Music Folder, Message File or High
Rotation File that it will be SAVED to
once they have been encrypted

Note - Files that have been encrypted
are renamed with the same filename, but the extension has been changed
from .mp3 to .bms.

Ie:  filename.mp3  -   becomes  -   filename.bms

To save considerable time and effort, we recommend that you encrypt
your Music Folders (genres) in a single run.

Содержание BMS2 Series





















Отзывы: