10
6. HMA Use and Programming
HMA software is extremely simple to use, but allows a wide variety of parameters to be set for ideal system calibration.
Setting Parameters is protected by password:
1:
Installer level (MENU’ CONTROL PARAMETERS, MENU’ IN/OUT PARAMETERS, MENU’ CONNECTIVITY PARAM.)
A password is required for this level; these parameters are adjustable by trained professionals
Default password:
001
From the menu a different password can be set up.
Installer level can be entered only with the correct password; otherwise, it is impossible to set up and/or modify any
parameters (they can be only displayed).
6.1 HMA display
It is a backlit display with 2 rows of 16 characters.
An acoustic signal accompanies the user in use and provides a quick indication in case of an alarm.
6.2 Initial configuration
When HMA is switched on for the first time, the initial setting menu is displayed for the initial setting of parameters to
configure the system. If the initial setting procedure is not completed properly, it is impossible to run the system. Initial
setting procedure can be repeated if necessary.
A brief description of parameters and their allowable ranges are listed below:
Parameter
Default
Description
XXXXX
End user communication language
Language
XXXXX
Switch to DC
/ Menù exit
Switch to AC
/ Menù exit
ENTER
Scroll up
Scroll down
AC + DC to
interrupt power
supply
Содержание HMA 218
Страница 1: ...Operating manual HMA manHMA_eng_00 ...
Страница 17: ...17 NOTE ...
Страница 18: ...18 ...
Страница 19: ...19 ...