www.nassarelectronics.com
3
PS-100 DIGITAL TIMER MANUAL
Setting the clock
To set the time press the “Prog” button, then press the
“Enter” button to enter to the clock setup menu.
Set the date using the up and down arrow buttons.
Once finished press the “Enter” button to set the next
adjustment
To set the hour use the up and down arrows. Press the
“Enter” button after finishing to proceed with the
minutes setup.
Set the minutes using the up and down arrows, then
press “Enter” to set between AM or PM.
Use the up and down arrows to set between AM or PM.
Press again the “Enter” button to exit the clock setup .
The clock is now set on time.
If the “Prog” button is pressed during set up you will
exit the Clock Setup menu.
SETUP CLOCK
N-Prog Y-
Enter
>> SETUP DAY <<
12:30 PM
MON
>> SETUP HOUR <<
MON
:30 PM
12
>> SETUP MIN <<
MON 12:
PM
30
>> SETUP AM-PM <<
MON 12:30
PM
Quick time change
The clock can be set forward or set back an hour with
out the need of entering the clock setup menu. This
feature is useful for DST (Daylight Saving Time)
changes.
On the “AUTO” main screen press simultaneously for
more than 2 seconds the upper arrow button to add
one hour or the lower arrow button to decrease one
hour on the clock.
Selecting the operation mode
The programmable timer has 3 operating modes:
automatic (AUTO), manual (MAN), and off (OFF).To
switch mode, press the “Auto- OFF- Manual” button.
AUTOMATIC MODE*
The programmable switch follows the programmed
schedule.
MANUAL MODE*
The programmable switch operates as a regular switch
and will turn ON the connected equipment.
OFF
The programmable switch no longer follows the
programmed schedule and turns OFF the connected
equipment.
>>
<<
AUTO
MON 12:30 PM
>>
<<
MANUAL
MON 12:30 PM
>>
<<
OFF
MON 12:30 PM
*The green LED indicator turns ON when the output
contact between terminals NO-NC is closed.
