www.nassarelectronics.com
2
PS-100 DIGITAL TIMER MANUAL
The PS-100 is a 7 day programmable digital timer
switch. Programming can be set for multiple on/off
events that automate everyday tasks and reduce
utility costs with up to 20 on/off settings per week, it
can even set weekday events differently than
weekend events. It includes an override button easily
accessible in the front of the timer so the output can be
turned on/off at any time without affecting the set
schedule. Daylight saving time changes are easily
adjusted by just pressing a button. Even when the
voltage supply fails, the clock is able to mantain the
time up to 10 years using an included internal battery.
Scheduled events won’t be deleted since they are
stored in the permanent memory.
It also includes a LED indicator that turns on when the
output contact is closed. The PS-100 is dual voltage, it
can be used with either 120 or 220V.
Ÿ
Saves energy
Ÿ
20 on/off settings per week
Ÿ
You can set events on weekdays,
weekends or daily .
Ÿ
Dual voltage, 120V/220V .
Ÿ
LED indicator of output status
Ÿ
10-year battery lifetime.
Features
Description
Wiring
The PS-100 digital timer can be connected to a supply
voltage of 120 to 220 VAC at terminals TC and T1.
The output contact terminals (NC, C and NO) can be
used to connect or disconnect any equipment as long
as it doesn’t exceed the contact current capacity.
DANGER!
Potentially hazardous voltages are present. Electrical
shock can cause death or serious injury.
Installation should be done by qualified personnel
following all National, State & Local Codes.
BE SURE TO REMOVE ALL POWER SUPPLYING THIS
EQUIPMENT BEFORE CONNECTING OR DISCONNECTING
THE WIRING.
READ THE INSTRUCTIONS BEFORE INSTALLING OR
OPERATING THIS DEVICE.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
10 Amp
100-250 V
TC T1 NO C
Power Supply
120/220 VAC
Output Contacts
10 Amp. Max.
Connection with Isolated Contacts
NC
Connection with Voltage Output
10 Amp
100-250 V
TC T1 NO C
Voltage
Output
120/220 V
Power Supply
120/220 VAC
