4
4
General Instructions for Use
A. Pressurizing the Veins with Synthetic Blood:
1.
Add 1 pint of distilled water to the pint bottle with blood powder;
shake it to mix.
2.
Be sure the clamp on the fluid supply bag A tubing is closed, fill it
with the blood and hang the bag no more than 18" above the level
of the arm.
(See Figure 2 and Inset.)
(Fluid Supply Stand shown
sold separately.)
3.
Attach the fitting end of the fluid supply bag A tubing to one of the
shoulder tubes. (Make sure the arm is palm down at this point.)
(See Figure 3.)
Note:
Connecting the fluid supply bag to the shoulder tube may
require a small amount of water soluble lubricant, heating the
shoulder tube end in the palm of a warm hand, or dipping the
shoulder tube end into warm water.
General Instructions for Use
A. Pressurizing the Veins with Synthetic Blood:
1.
Add 1 pint of distilled water to the pint bottle with blood powder;
shake it to mix.
2.
Be sure the clamp on the fluid supply bag A tubing is closed, fill it
with the blood and hang the bag no more than 18" above the level
of the arm.
(See Figure 2 and Inset.)
(Fluid Supply Stand shown
sold separately.)
3.
Attach the fitting end of the fluid supply bag A tubing to one of the
shoulder tubes. (Make sure the arm is palm down at this point.)
(See Figure 3.)
Note:
Connecting the fluid supply bag to the shoulder tube may
require a small amount of water soluble lubricant, heating the
shoulder tube end in the palm of a warm hand, or dipping the
shoulder tube end into warm water.
A.
A.
B.
B.
Figure 2
Figure 2
Figure 3
Figure 3
NP097_95_LF01121U_LF01126U_AdvancedInjectionArm.indd 4
12/19/14 3:29 PM
