Nasco Healthcare Simulaids 100-1296, Инструкция по эксплуатации, Страница: 2 / 8

This manual is not meant to provide instruction in Cardiopulmonary Resuscitation (CPR) or other emer-
gency life support procedures. This product can be used for demonstration and teaching proper CPR and
first aid techniques.
Features include: a carotid pulse, the normal range of motion of the extremities, and a full human body
for realistic practice in transport-rescue and lifesaving procedures. The lifelike anatomical landmarks
include: sternum, ribcage, substernal notch, and the natural resistance to chest compression. Add our
trauma options to allow training in basic CPR, lifesaving rescue procedures and trauma rescue.
The chart (below) shows the products covered by this instruction. Export models are sold with mouth/
nose pieces with the nares drilled. This allows for nose pinch procedures and ventilation through the nose.
All other features of the manikin are the same. The light console box for “with electronics” models is
battery operated. Four (4) AA batteries are included. Replacement part numbers are listed at the end of
the instruction booklet.
ITEM DESCRIPTION QUALIFIER
2700 Adult CPR Full Body Rescue/Trauma – Light base unit
2700EXPORT Adult CPR Full Body – Light mouthpiece nares drilled
2700 SPEC. Adult CPR Full Body – Light includes IV arm, carry bag, trauma moulage kit
2725 Adult CPR Full Body w/Console – Light light box included
2725EXPORT Adult CPR Full Body w/Console – Light light box included, mouthpiece nares drilled
2730EXPORT Adult CPR Full Body Export 145 lbs. weighted, mouthpiece nares drilled
2725B Adult CPR Full Body w/Console – Dark Dark 2700, light box included
2750 Adult CPR Full Body – Dark Dark 2700
2750EXPORT Adult CPR Full Body – Dark Dark 2700, mouthpiece nares drilled
2725EXPORTB Adult CPR Full Body w/Console – Dark Dark, light box included, mouthpiece nares drilled
WHAT YOU RECEIVE:
• Manikin
• 5 additional mouthpieces (replacements sold in 10-packs)
• 5 additional lung systems (replacements sold in 10-packs)
• 1 ball valve assemble (2701; electronic model 2727) installed
• 1 squeeze bulb assembly for the carotid pulse (item 2028)
• 1 pair of shorts (PP0383XL)
• 1 console box “with electronics” that indicates proper
hand position, adequate ventilations and adequate
compressions (2031)
OPTIONS THAT YOU MAY ORDER INCLUDE:
• Item 2725: CPR Full Body with electronics (a console with
LEDs that indicate proper hand position, adequate
ventilations and adequate compressions is included)
• Item 2704: Transport Rescue Head to use during rough
handling when you want to protect the CPR head from
damage
• Item 1373: A full body-sized carry bag for the manikin and
supplies
• Item1374: IV Lower Ar m with Hand
• Item 6701: Trauma Moulage Kit
2
CONSTRUCTION
The CPR Manikin’s body is suspended on a skeleton of steel and flexible cable. Some enlargement of the
body segments (joints), cable connector openings or gaps between the body joints may develop with
extended use without affecting the serviceability of the manikin.
Do not allow print material to come in contact with the skin of your product. The ink will embed in the
porous surface and be impossible to remove. Ink stains are not covered under warranty.
CARE AND MAINTENANCE
Since Simulaids’ Adult CPR Full Body Manikin takes the place of a live victim in your training program, it
should be maintained with care and treated as you would any other valuable training tool. It should not
be dropped nor subjected to temperatures above 100°F. These precautions will prevent deformation of
the body and possible damage to the internal skeletal structure. Care should be taken to ensure that the
body and limbs are not punctured or torn. Simulaids’ Adult CPR Full Body Manikin features fully artic-
ulated limbs. However, care should be taken not to twist the arms and legs into positions that a human
body would not normally withstand. After each training exercise, or when needed, the manikin can be
washed with hot, soapy water. Do not immerse the product. The use of solvents or strong cleansers are
not recommended. However, an “all-purpose” cleaner (i.e., Fantastic® or 409®) may be used.
Special care should be taken not to have any print material come in contact with the skin surface. Ink will
transfer to the plastic parts and be next to impossible to remove. you will end up with a stain if ink embeds
on the plastic. Do not wrap it with newspaper or other print material when storing it. Ink stains are not
covered under warranty.
WARRANTY
Simulaids warrants this product to be free from any defect in materials and/or workmanship for a period
of three years from the date of purchase, as evidenced by the date of invoice when the product was
shipped to the end user. This warranty expressly does not cover abuse, accidental or purposeful damage,
or any form of modification to the product. Simulaids reserves the right to either repair or replace affected
parts or the entire unit, at their sole discretion, after investigating and reviewing the actual product and
the damage. In most instances, a digital photo of the product in question showing the damage will help
qualify a product for return to the factory. At no time will any product be accepted at the plant without
proper return authorization issued by Simulaids.
Freight and shipping charges are the sole responsibility of the end user. No product will be received with
shipping chargers due. Any product considered for warranty work must be identified by serial number and
invoice number from the agency through whom the product was purchased. Without this information the
product will not be receive a return authorization number as required.
RETURN POLICY
Should it be necessary to return an item for credit or for any other reason, contact our Customer Service
Department to obtain an RGA Number. Please refer to your invoice number when phoning in your request
for returning merchandise. Should you have any questions or wish further information on any product we
manufacture, call or write our Customer Service Department.
REPLACEMENT PARTS LIST
2701 Airway Cutoff Ball Valve for
CPR/Trauma Manikin
2727 Airway Cutoff Ball Valve for
Electronic Model
2023 Channel Mouth/Nose Pieces – Light (10 pk.)
2601 Channel Mouth/Nose Pieces – Dark (10 pk.)
2507 Airways with Lungs (10 pk.)
2030 Lungs only (20 pk.)
2703 CPR Head (rigid) – Light
2704 Transport Rescue Head – Light
2754 Transport Rescue Head – Dark
1373 Carry/Storage Bag
1374 IV Lower Arm with Hand
1374B IV Lower Arm with Hand – Dark
6701 Trauma Moulage Kit – Light
6701B Trauma Moulage Kit – Dark
WEIGHTS & DIMENSIONS
Manikin weight 49 lbs. Shipping weight 60 lbs. Shipping dimensions: 50" L x 12" H x 21" W
7
HC18000028INM48.indd 3-4 12/17/18 3:34 PM