NS-9094
Vacuum Cleaner
6
Control panel
A
. Indicates that bag is full
B
. Speed 1 )curtains, textiles, etc.( lowest
suction
C
. Speed 2 )sofa, backrest, sofa, etc.(
D
. Speed 3 )carpets, rugs, kilims, etc.(
E
. Speed 4 )parquet, ceramic, etc.( highest
suction
Using the series guide
1.
The main brush has a pedal that adjusts ac
-
cording to the level.
)as shown in Figure 2-1(
•
If the sweeping area is carpet, rug or kilim,
press the pedal down to raise the brush.
•
If the place for sweeping is surfaces such as
parquet, tiles, ceramics, etc., press the pedal
upwards to lower the brush.
2.
The corner tool is used to clean angled
and limited access points such as radiators,
drawers and wall corners, etc.
3.
Telescopic tube is used for sweeping
bread crumbs, hair, etc. without installing any
parts on it.
4.
Dust brush is used to remove dust on cur
-
tains, shelves, bookshelves, lamps, clothes,
appliances, etc. Attach it to the end of the
telescopic tube opening.
5.
A small brush is used to clean pillows, mat
-
tresses and chairs.
6.
Taking the plug, unplug the power cord as
needed and plug it into the power outlet.
7.
Turn the device on/off by pressing the “ON/
OFF” button.
8.
Increase/decrease the suction power by
using the buttons on the device
)as shown in
Figure 2-2(
1-6
1-4
1-5
A
B
C
D
E
2-2
2-1
After finishing work with the device
1.
Turn off the appliance and unplug it.
2.
To collect the power cord in this model, just
grab the cord and pull it slightly to collect it au
-
tomatically.
•
When assembling the device cable, hold the
plug by hand to prevent the plug from collid
-
ing with the body of the device and to prevent
damage to the body of the device
)as shown
in Figure 3(
.
3
Dust bag replacement guide
•
If the bag full indicator indicates a constant
red color, it means that the dust bag is full
and needs to be replaced.
1.
Turn off the appliance and unplug it.
2.
Disconnect the flexible coupling from the
suction port by pressing the side latches on it.
3.
Unlock the device tank by pulling the front
lock upwards.