NARVON
7
All washed and/or sanitized parts must be completely dry before being
carefully reassembled . Some components must be lubricated in order to
work efficiently. A tube of lube is included with each machine.
Fig. 15
Fig. 16
Fig. 18
Fig. 17
Fig. 19
Fig. 20
Fig. 21
CAUTION
When cleaning
or lifting,
DO NOT GRAB
THE MACHINE
BY THE
CYLINDRICAL
EVAPORATORS .
REASSEMBLY
Bowl
(Fig. 15-19)
Lid
(Fig. 20)
Dispensing Tap
(Fig. 21)
1 .
Place the Bowl Gasket at the bottom of the Cylinder
Evaporator, lubricating the upper part (A). (Fig. 15)
2 .
Lubricate the surface of the cylinder in the zone of
the transmission shaft outlet (A). (Fig. 16)
3 .
Place the Spiral Blade Gasket (B), lubricating both the
internal and external surfaces. (Fig. 16)
4 .
Insert the Spiral Blade so that the head joins the
transmission shaft. (Fig. 17)
5 .
Lubricate the external part of the head of the Spiral
Blade (A). (Fig. 17)
6 .
After all bowl components are properly positioned
and lubricated, slide the Bowl into position. (Fig. 18)
7 .
Secure the bowl by screwing the Bowl Fixing Knobs
clockwise. (Fig. 19)
1 . Insert the sloping lid into the bowl .
2 .
Rotate the back of the lid into position.
1 .
Place the Lever (E) in place so Pin (B) lines up
correctly. Insert Pin (B) and secure.
2 .
Lubricate the Tap Valve (C).
3 .
Insert the Spring (D) into the product supply hole,
followed by the lubricated Tap Valve (C) and secure
with Pin (A).
A
A
A
B
1
2
A
B
C
D
E
Содержание 378SMM1B
Страница 2: ...NARVON...
