NARVON
6
WASHING & SANITIZING
CONDENSER CLEANING
WASHING
SMM1B & SMM2B
(Fig. 14)
SANITIZING
To maintain health standards and product quality, the machine should be cleaned as often as possible.
Regular maintenance of the condenser ensures the quality of the product and efficiency of the machine.
This cleaning should be performed at least once a month .
Sanitizing must be done before the initial use of the
machine or if it is not used for an extended period of time.
•
Fill a basin with lukewarm water (Approx. 104°F) and
a neutral detergent suitable for plastic items.
•
DO NOT use abrasive powders which might affect
the bowl’s transparancy .
•
Wash all components (except the lid) in the basin.
• DO NOT wash the lid by dipping in water . Doing so
may damage electric components .
•
Use a wet, soft cloth.
• Rinse all parts carefully with clean lukewarm water to
remove any residual soap .
•
Dry all parts with a soft cloth.
•
If the machine will not be in use for an extended
period, cover and keep it away from dust.
•
Remove the left side stainless steel panel by
unscrewing the Fixing Knob as shown.
•
Use a soft and dry brush to remove the dust from the
condenser fins.
•
When cleaning is complete, replace the side panel
and secure with Fixing Knob.
•
Follow washing instructions
.
•
Make a solution of lukewarm water (Approx. 104°F)
and hypochlorite (bleach) with a 10g to 1L ratio.
•
Use a soft cloth or brush to apply the solution
to all components .
• Rinse all parts carefully with clean lukewarm water
to remove any residual solution.
•
Dry all parts with a soft cloth.
DO NOT wash any components of the machine in the dishwasher .
The machine must be turned OFF and unplugged from the power source before cleaning .
CAUTION
CAUTION
Fig. 14
Содержание 378SMM1B
Страница 2: ...NARVON...
