22
NARVON SUMMIT
TROUBLESHOOTING
* In the event that the machine malfunction is not specified in this table or the solution is not appropriateto solve a specific
problem, contact a specialist technician.
* If the consistency of the product is not adequate, check the consistency adjustment in the Menu. Contact a specialist technician.
* If the light does not come on, see the section on light alarms, on Page 19.
PROBLEM
CAUSE
SOLUTION
The machine does
not turn ON
The Main Switch is OFF
Turn the switch to ON
The machine is not plugged in
Plug the machine into the outlet
Leaking tap
Tap seal not lubricated
Lubricate tap seal
Damaged seal
Replace tap seal
Loss of product from
rear part of the bowl
Bowl not correctly assembled
Control bowl assembly
Bowl seal not lubricated
Lubricate tap seal
Damaged seal
Replace tap seal
The mixer does
not turn
There are blocks of ice inside the bowl
Activate Defrost & Slush, let the product defrost and check that
the product is homogeneous
The machine does
not produce slush
Machine near heat sources.
Change machine position
Machine with insufficient ventilation
Change machine position
Dirty filter
Clean the filter
Erroneous regulation of consistency
Correctly regulate the consistency
Noisy mixer
There is not enough product in the bowl
Fill the bowl
The display shows
an alarm
Break-down or malfunction
See Alarms or call technician
