2
NARVON SUMMIT
TABLE OF CONTENTS
SAFETY
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PARTS DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
WARNING ALARMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
• Children must not play with the machine:
This appliance cannot be used by children who are younger than 8 years old, or by people with reduced physical, sensorial, or
mental capacities. Those with lack of experience or know how must be given the appropriate supervision and training before
operating the machine. Cleaning and maintenance must be carried out by qualified personnel.
• Emergency situations:
WARNING
In each emergency situation, in order to stop the machine, push the black switch located under the machine and
unplug it. In the event of machine blockage due to cooling, turn the machine off and contact a specialized technician. In the
event of fire, immediately evacuate the area to allow the personnel in charge and equipped with suitable protective means to
intervene. Always use standard extinguishers, never use water or substances of an uncertain nature.
- The outlet that the machine is connected to must:
• Correspond to the type of plug that it is fitted with
• Correspond to specs outlined on the serial plate
• Be properly grounded
• Be connected to a circuit breaker
- The electricity cable must not:
• Come into contact with any type of liquid
• Be flattened or come into contact with sharp, cutting surface areas
• Be used to move the machine
• Be used when it is damaged
• Be handled with damp or wet hands
• Be rolled in a ball when operating
• Be altered. If the supply cord is damaged, it must be replaced by the manufacturer or similarly qualified persons in order to
avoid a hazard
5GM2
5GM3
