NARGESA TS10, Инструкция

Страница: 14 / 27

INSTRUCTIONS BOOK OF WELD POSITIONER TS10 13
MSD00 -> -> POSIT
INI ANGLE 0º
MSD00 -> -> POSIT
END ANGLE 360º
MSD00 -> -> POSIT
WELDING 15º
MSD00 -> -> POSIT
GAPS 10º
MSD00 -> -> POSIT
END ANGLE 90º
MSD00 <- <- POSIT
END ANGLE 90º
Now the following parameters will show up:
· Indication of the start and end of welding (in degrees).
Picture 20. Screen for discontinuous welding memory
Picture 21. Screen of Discontinuous welding memory
· Length od welding
Picture 22. Screen of the discontinuous welding memory
· Gap between welding
Picture 23. Screen for the discontinuous welding memory
For the turning direction parameters, starting time and overlapping, the access is made directly through the
function keys that are already set for that.
Picture 24. Screen for the Right turning dire
Picture 25. Screen for the Left turning direction