NARGESA 2021-1660, Инструкция

Страница: 12 / 40

- 14 -
5.1. Introduction
This manual is designed to be an useful tooling for the MX340G user since it has important information
about the usage and specifications of the machine. Therefore it is important to follow step by step all the
points detailed in this manual so to get to achieve a better understanding of the performance of the
machine.
5.2. Power supply of the machine
In order to feed up the machine, just set the Start switch to the CONNECTED position. Then, a label as
the one below will show up on the screen.
Picture14. Message system reset
Machine pilots for voltage and reset the system will illuminate. We perform the Reset by pressing the but-
ton on the control panel. The alarm lamp will turn off, if not so, make sure that there is no abnormal situa-
tion.
The machine is at the moment in a StandBy mode, where the machine is activated but it is in rest position
awaiting any order.
5.3. Activation of the machine
Once the machine is initialized and in StanBy mode, you may activate it to work with it following the steps
we describe below:
In order to do it correctly , please, press the key ON . Then you ’ ll spot a label on the LCD screen reading
what is said below:
Picture 15.Label indicating the machine is activated
The information represented in the previous Picture shows the current operation mode, in the display
(Manual or Automatic).In the lower line there is the meter of the machine which is increased every time the
pedal is pressed.
REARMING
MANUAL
CNT: 0