Narex EPR 35-24, Инструкция по эксплуатации

Страница: 27 / 44

��
Attention: Any maintenance or repair
work going beyond that described in
these Operating Instructions may only
be carried out by authorised persons or the
works after-sales service.
Attention: If the power supply lead of
this device shows any defects, the lead
must be replaced by an authorized re-
pair shop only or through the manufacturer’s
own service personnel, as this work requires
special tools.
Service
See enclosed sheet.
Environmental Protection/
Disposal
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools
into household waste!
According to the European Directive
2002/96/EC on waste electrical and electronic
equipment and its incorporation into national
law, power tools that are no longer suitable for
use must be separately collected and sent for
recovery in an environmental-friendly manner.
Storage
The unit should be stored in a dry place where it
is protected against freezing.
Guarantee
Our equipment is under warranty for at least
12 months with regard to material or production
faults in accordance with national legislation. In
the EU countries, the warranty period for ex-
clusively private use is 24 months (an invoice or
delivery note is required as proof of purchase).
Damage resulting from, in particular, normal
wear and tear, overloading, improper handling,
or caused by the user or other damage caused
by not following the operating instructions, or
any fault acknowledged at the time of purchase,
is not covered by the warranty. Complaints will
only be acknowledged if the equipment has not
been dismantled before being sent back to the
suppliers or to an authorised NAREX customer
support workshop. Store the operating instruc-
tions, safety notes, spare parts list and proof of
purchase in a safe place. In addition, the manu-
facturer’s current warranty conditions apply.
Note
We reserve the right to make changes to the
technical data contained in this information as a
result of ongoing research and development work.
Noise level and vibrations
Noise emission values in accordance with
EN 50 144-2-13:
Sound Pressure Level L
pA
93 dB (A).
Vibration values in accordance with
EN 50 144-2-13:
Weighted acceleration handle max. 11 m/s
2
.
Declarations of conformity
We declare under our sole responsibility that
this product is in conformity with the following
standards or standardization documents:
EN 50 144-1, EN 50 144-2-13, EN 55 014-1,
EN 55 014-2, EN 61 000-2-3, EN 61 000-3-3
according to the provisions of the regulation
14/2000/EC.
���������������
�����������������
������������
����������������
�����������������
01.07.2008