Narex AS 12-3, Инструкция по эксплуатации

Страница: 8 / 20

English
8
Technical data
Battery flashlight
Type AS 12-3 AS 14-3
Voltage. . 1.V. 14.4.V
Weight.incl..battery. . 0.95.kg. 1.15.kg
Luminance:.. LED.diodes. 150.Lux. 150.Lux
. Light.bulb.(crypton).. 180.Lux. 180.Lux
Lightening.length:. LED.diodes. approx..10.hours. approx..10.hours
. Light.bulb.(crypton).. approx...hours. approx...hours
Flashlight.roll.angle. . 30°.–.110°. 30°.–.110°
Coupling.hook. . 69.mm.(distributed.length)
Switch.modes:. ON.(LED).>.ON.(LED.flash).>.ON.(bulb).>.OFF
The displayed or described accessories need not be included in the delivery package.
General safety procedures
Safe work with this tool is possible only if you carefully read this manual through and strictly follow the instructions
written herein. Keep the manual.
1. Observe carefully the safety instructions, which form a part of every delivery.
2. Keep your workplace clean and tidy. Otherwise you might find yourself in the risk of an injury.
3. Consider the conditions of the working environments. Do not expose the power tool to the rain, humidity or moist
areas.
4. Keep your workplace safe. Do not use the power tool in an explosive, incendiary or chemical environment.
5. Protect yourself from an electric injury. Do not touch any unprotected electric clips, contacts, etc.
6. Store an unused tool on a dry, elevated or otherwise secured place - out of the reach of children or any unauthor-
ised persons.
7. Protect the tool from an unintentional contact making. Before you insert the battery make sure the switch is either
secured or in the OFF position.
8. Be alert. Do not use the tool if you are tired or under an influence of any habit-forming drugs, alcohol or medica-
ments.
9. Do not interfere with the construction of the tool. Any modifications or adaptation mean improper use and might
lead to an injury.
10. Keep the tool clean and check it regularly. If the tool is damaged, let an authorised workshop deal with the repair.
11. Do not load the cable. Do not carry the charged by the cable, do not drag the cable from the socket by wresting.
Protect the cable from contact with heat, fats and sharp edges.
12. Do not use a defective or damaged battery.
13. Do not dismantle the battery.
14. Do not store or keep the battery together with metal objects. There is a risk of short circuit.
Do not throw the battery into the fire or garbage containers.
Main components of the flashlight (Fig. A)
1. Light I: Crypton bulb
2. Light II: Highly efficient LED diodes (15 pieces)
3. Lamp cover: For a warning signal when the LED diodes flash
4. Joint: Tilting 30° – 110°
5. Switch: The on- and off- function
6. Hook: For suspension of the flashlight
7. Battery: Charging battery (not included in the
delivery package)
1
2
4
5
6
7
3