Page
7
/ 28
ELECTRICAL CONNECTION
*The device must be connected to the main electricity grid only by authorized electricity technicians in
accordance with the laws and regulations in force.
*Make sure that the power from the main grid is enough to supply the power stated in the information tag
placed on the front bottom of the device.
*If the current of fuse in your house is less than 16 Ampere, have a qualified electrician connect a 16
Ampere fuse.
WARNING: The device must absolutely be grounded.
*Your oven includes a grounded plug mounted on the grid cord. This plug must be used with a grounded
line. Have a licensed electrician do the grounding installation.
Before supplying electricity to the device:
1) Place the oven in a way to make reaching the plug used for electricity connection or double pole switch
easier.
2) Do not let the electricity cable touch hot surfaces when placed and do not pin it to the oven lid.
3) Contact the nearest authorized service if the electricity cable is damaged. Make sure authorized service
makes the chance with a new cable with plastic insulation at the same size and that can withstand the
electricity current the oven needs.
*A double pole switch with at least 3 mm between the contact points between the device and the electric
wire and suitable for carrying the desired load in accordance with the laws in force must be installed.
If the device is to be connected directly to the electric wiring. Ground wire must not be cut be double pole
switch.
*It is not advised to use adapters, multi plugs or extension cords. If absolutely necessary, adapters or
extension cords in line with safety laws can be used. However, never go beyond the maximum current
capacity and maximum power stated for the adapter.
*Test heating elements for 3 minutes after the connections are done.
*Electricity safety of the device is guaranteed only if connected to suitable source correctly with grounding
in accordance with the rules. Our company cannot be held responsible for the damages to people,
animals or properties due to the failure to ground the device properly.
WHEN THE DEVICE IS INSTALLED INITIALLY:
1. Set the Temperature Control to maximum level. (250 C MAX)
2. Set the Function button as Top and Bottom Grill (and + Fan if available).
3. Run the oven in this setup for 30 minutes.
4. Open a window for air circulation.
A smoke and smell resulting from insulation materials and heating elements can be experienced for once
during this period. If this happens, wait for the smoke and smell to dissipate before placing food inside the
oven.
*After these are done, clean the interior of the oven with a slightly wet soapy soft cloth.
IMPORTANT: Always use the middle section of the handle when opening the lid of the oven.
WARNING: Carefully wash parts such as tray, grid etc before the first use of the oven.
