manualshive.com logo in svg

NARDA RadMan, Руководство по эксплуатации, Страница: 60 / 60

Поделиться
Скачать
NARDA RadMan Скачать руководство пользователя страница 60

After switching on

1. The LEDs light up briefly one after another, 

starting with the 12.5% LED.
A “beep” is then heard.

2. The battery charge state is indicated. One 

of the four LEDs lights up.
–

100% LED means:

 More than 75% of 

the battery capacity is available.

–

50% LED means:

 More than 50% of 

the battery capacity is available.

–

25% LED means:

 More than 25% of 

the battery capacity is available.

–

12.5% LED means:

 Less than 25% of 

the battery capacity is available.

–

No LED lit means: Batteries need 
changing. ESM “RadMan” will soon no 
longer be operational.

A “beep” is then heard.

3. The H-field sensor is activated; the E-field 

sensor is inactive.
A “beep” is then heard.

4. The E-field sensor is activated; the H-field 

sensor is inactive.
A double “beep” is then heard. 

5. ESM-30 only:

The data recorder is configured.
A triple “beep” is then heard. 

The instrument is now ready for use.

ESM “RadMan”

BN 2250/xx and BN 2251/xx
Brief operating instructions

Downloaded from

Arrow.com.

Содержание RadMan





























































Отзывы:

Нет отзывов