NARDA RadMan Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 60

NARDA RadMan Скачать руководство пользователя страница 18

16

After

unp

a

c

king

After

unp

a

c

king

Recovery after storage and transport

The guaranteed operating temperature range
of the instrument is -10 to +50 °C.
Condensation may form on equipment that
has been stored or transported at low
temperatures when it is brought into a warmer
environment. To avoid damaging the
instrument, wait until the condensation on the
instrument has evaporated before switching
on. If stored at a higher temperature, wait until
it has cooled to within the operating range
before switching on.

Power supply

ESM “RadMan” is battery powered.

•

Two 1.5 V batteries (alkaline manganese
AAA size) operating life typically 200
hours.

ESM “RadMan” is shipped without batteries
fitted.

Fitting the batteries

⇒

Make sure that the ESM “RadMan” is
switched off.

⇒

Fit the batteries

⇒

Switch the ESM “RadMan” on after
changing the batteries and monitor the self
test (see page 19).

⇒

ESM-30 only:
Set the date and time to provide a
reference for recorded data. To do this,
use the ESM-TS Interface Set which is
available as an option.

Storage, Power supply

Downloaded from

«
...
16
17
18
19
20
...
»

Содержание RadMan





























































Отзывы:

Нет отзывов