NARDA 8718B, Руководство пользователя

Страница: 23 / 137

22 Operating the Meter
4. Change the units (if needed) by pressing either
F1 ( kHz), F2 ( MHz ), or F3 ( GHz ).
5. Press F4 ( SAVE ). The probe correction factor will be
displayed briefly if you are using a probe in memory
and you will automatically return to the measurement
screen. See Using Probe Correction Factors on page 24.
6. From the Main Measurement Screen press F1(ALT ) to
select the Alternate Measurement Display Screen .
To return to the Main Measurements Display Screen...
1. From the Alternate Measurement Display Screen , press
F1 (MAIN ) to select the Main Measurements Display
Screen .
N
ote
Alternate values can-
not be calculated at
low frequencies for
standards with very
high magnetic field
limits. A “greater
than” symbol (>) is
shown under these
conditions.