14
Entering the Probe Model
Narda's 8700 Series system is completely modular — all 8700
meters work with all 8700 probes.
The single most important
thing you must do is "tell" the 8718 meter which probe you
are using.
The Model 8718 has the basic characteristics of every 8700
Series probe stored in its internal memory. All you have to do is
select the correct model number and the meter automatically
sets the correct scales.
The Model 8718
can also store the specific calibration details
for up to six probes
.
This includes the probe serial number,
calibration date, and the calibration factors marked on the
handle of the probe. Probes with this additional detail stored in
the meter are referred to as
probes in memory
.
Putting probes into memory has several advantages:
•
It makes it easier to select a probe
•
Data that is downloaded after using a data logging mode
will include a record of the probe’s calibration date and
its serial number.
•
It makes using frequency correction much easier.
Probes are put into the meter’s memory using a personal
computer:
•
By Narda
on the day of shipment for all probes shipped
at the same time as the meter.
•
By you
at any time when you use the Interface Software
supplied by Narda and a personal computer. Refer to
Operation and Maintenance Manual
for detailed
information regarding computer operations.
