Page 12
4
Putting into operation
4.1 Device setup
When setting up the device, please proceed as described below:
•
Connect the Narcotrend-Compact M via its external power supply to a power
socket.
•
Switch on the Narcotrend-Compact M.
•
Place the electrodes on the patient's head (see below).
•
Connect the patient lead to the input on the front side of the
Narcotrend-Compact M.
•
(Optional) Connect the RS232 interface connector to the parent host device.
•
Use only the components (power supply (incl. power cords, patient lead)) that
belong to the device.
•
For safe use, connect the Narcotrend-Compact M - power supply to a
protective earth conductor.
•
Prior to each application, check the functional safety and proper condition of
the device. A damaged device must not be put into operation.
•
Do not block the ventilation inlet holes on the equipment’s rear panel.
•
The touchscreen reacts very sensitively. Please don’t use sharp or pointed
objects like pens or pencils for operation.
4.2 Device setup (IntelliBridge (optional))
When setting up the device, please proceed as described below:
•
Plug the Philips-IntelliBridge EC10 module in a free slot space of the Philips-
IntelliVue patient monitor.
•
Connect the Narcotrend-Compact M to the connecting cable (CAT-5 cable) and the
Philips IntelliBridge EC10 module.
•
Place the electrodes on the patient's head.
•
Connect the patient lead to the Narcotrend-Compact M.
Once the Narcotrend-Compact M is connected to the Philips-IntelliVue patient monitor,
the data transfer begins including the EEG and the results of the automatic
classification.
