03
13
Main Menu
28
05
CD/MP3/SD/USB
Set up Main Menu
As the figure above on the menu, press and
hold SETUP on the remote control or click it
on the screen to enter setting menu as the
figure below:
This menu includes VIDEO, AUDIO, TIME,
SCREEN ADJ, SYSTEM, KEY CONFIG,
BACKGROUND, DEFAULT.
.
Click your
desired item to enter corresponding setting
sub menu
1.Video Adjust
After selecting VIDEO, the sub menu will
be shown as the figure below:
In this menu you can adjust BRIGHTNESS,
CONTRAST and COLOR.
Click / to adjust the corresponding
numerical value, and then click SAVE to
save preferences or click RESET to go back
the default setting.
Click to go back to the SOURCE menu,
to go back to the previous menu.
to
click
Sliding horizontally on the screen turns over
the menu as the figure below:
Click icon on the screen to go back to the
SOURCE menu.
2.Audio Adjust
After selecting AUDIO, the sub menu will
be shown as the figure below:
In this menu you can adjust TREBLE, BASS,
SUBWOOFER and EQ.
Click / to adjust the corresponding
numerical value, click / to choose your
desired effect and then click SAVE to save
preferences or click RESET to go back to the
default setting.
Click to go back to the SOURCE menu,
to go back to the previous menu.
click
During
CD
status, press
OSD
button the
display shows:
Single elapsed
Single remain
Note:
* This function is operated by using the remote
control.
On Screen Display
Program Playing
During CD mode, press
PROG
, the TFT
displays the program menu. Press
NUMBER
BUTTONS
to select the track Number and
then press to move the cursor to
START
,
press
ENTER
to start program playing;
move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to and press ENTER to the previous page;
move the cursor to and press ENTER to
the next page. During this process, press
to cancel the program playing.
13
18
The function is only valid on remote control.
Note:
*
27
* Press CLEAR to clear the mistake input.
22
Eject SD Card
Push SD card to eject it.
During SD playing mode, to eject SD card to
switch to Disc mode; If there is no disc in
the main unit, it will switch to USB mode,
or else, it will switch to Radio mode.
During other modes, to eject SD card to keep
the previous mode.
Eject USB
Pull USB to eject it.
During USB playing mode, to eject USB to
switch to Disc mode; If there is no disc in
the main unit, it will switch to SD Card mode,
or else, it will switch to Radio mode.
During other modes, to eject USB to keep
the previous mode.
Display Off
