Napoleon SDO800, Инструкция по установке и руководство пользователя

Страница: 8 / 16

6
1. Fixing the track bracket. Fixing the track bracket to the wall 2cm-15cm over the shaft or
intermediate bracket (depend on the actual installation space).
2. Fixing the steel track to the bracket with cotter pin A. (Fig. 1)
3. Fixing garage door opener to the track by U hanging bracket A. It
‟s enough for 2 Nm
fastening force.
4. Fixing the motor bracket. Fix the motor bracket as closer to the opener as you can, if there
is enough space.
Notice: Make sure the track is horizontal and vertical to the shaft. Make sure the connection of
iron angle B and ceiling is firm enough.
5. Fixing the track by iron angle A and U bracket B.
6. The connection of panel bracket and panel connector refers to the installation of aluminum
track. Fix the clutch cord.
7. Release the clutch, try to open and close the door by hand. Make sure there is no
resistance between door panel and track.
8. Connecting the opener with power and adjusting the operation.
Notice: Make sure the opener
‟s voltage is in accordance with the local voltage. Connect
the opener to a properly earthed power supply.